When we have a load cell application that requires compression measurement, we have to select the load cell model we are using in every case.
While one of the most common load cells used for compression are the off center models, Futek went further into innovation and investigation so they developed the LTH and LLB models to use in specific compression applications. Obviously this model comes with extremely useful features that can help you with your project.
Extraneous forces
In every load cell installation you have to be aware of the extraneous forces that you may find in your process. In this specific regard, you won’t have to worry about a thing, as these load cells are not just protected against it, but have a really low sensitivity towards extraneous forces. This means that the load cell has a really high percentage of dismissing off axis forces.
Size
The keyword would be “flexibility”. When developing a new project, you really want to have options and alternatives, and that’s exactly what Futek provides. With a wide range of sizes from miniature load cells to high capacity fatigue load cells, you’ll find a sensor that covers every need your application has.
Repeatability
More often than not, we need a high repeatability value as we need our results to be the same as much as possible. In this regard, Futek’s load cells have more strain gauges than many other load cells in the market.
Compensation
Balance compensation and temperature shift zero compensation are usually integrated somewhere in the cable of the product. With Futek’s product this isn’t an issue. You can trim the wire to the desired length without worrying about a thing, as this compensator is integrated inside the sensor canister.
If you have any questions regarding this or any other Futek product, contact us!
Visit our website:
www.logicbus.com
sales@logicbus.com | support@logicbus.com | +1 619 616 7350 | Start conversation